Browse audio jacks, plugs and connectors for audio cables and amplifier projects. This category includes RCA plugs, RCA jacks (also called phono jacks), banana plugs and spade or fork connectors.
Check each product's dimensions and termination details before ordering; connectors with a similar appearance may fit differently.
Looking for panel-mounted speaker terminals? Browse our Speaker Binding Posts.
Brand NewQuantity:Interface type:AV
Brand NewQuantity:Interface type:AV
Brand NewQuantity:Interface type:AV
Brand NewQuantity:Interface type:AV
Brand NewQuantity:Interface type:AV
Brand NewQuantity:Interface type:AV
Brand NewQuantity:Interface type:AV
Brand NewQuantity:Interface type:AV
Select a question to read the answer.
Yes. In connector terminology, RCA and phono commonly name the same connector family. A PHONO input on an amplifier is a different matter: it identifies an input intended for a turntable cartridge signal, rather than an ordinary line-level source. The connector shape alone does not tell you which input circuit is behind it. See Yamaha's phono and line-input guide.
An RCA plug has a projecting centre pin that mates with the socket in an RCA jack. Cable plugs and chassis-mounted jacks also need different mounting and cable-termination arrangements. For a replacement, match the connector gender first, then check the cable entry or panel mounting details and the way the wires attach.
Check the cable outside diameter against the connector's entry and strain-relief range, then check the conductor termination and assembly instructions. A shell that slides over the cable is not enough: the cable must also fit the clamping and wiring arrangement. Do not assume that a screw-locking shell means the signal wires need no soldering. For an example of model-specific requirements, see Neutrik's RCA plug specifications.
No. A banana plug needs a compatible socket, while a spade must fit around the terminal stud and sit securely under its clamp. Terminal covers and surrounding clearance can also restrict access. Check your equipment manual and connector dimensions; for the fixed panel terminals, browse our Speaker Binding Posts.
Only if the equipment manufacturer specifies that connection and an appropriate cable. RCA describes a connector, not the power rating or signal function. Do not connect an amplifier's speaker output to a line-level input. Check both devices' manuals: an adapter that physically fits does not establish electrical compatibility.